Assign-Queue; Drop - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
13.4.1.1 no policy-map
This command eliminates an existing DiffServ policy. The
name of an existing DiffServ policy. This command may be issued at any time. If the
policy is currently referenced by one or more interface service attachments, this delete
attempt fails.
Format
Mode

13.4.2 assign-queue

This command modifies the queue id to which the associated traffic stream is assigned.
The queueid is an integer from 0 to n-1, where n is the number of egress queues supported
by the device.
Format
Mode
Incompatibilities Drop

13.4.3 drop

This command specifies that all packets for the associated traffic stream are to be dropped
at ingress.
Format
Mode
Incompatibilities Assign Queue, Mark (all forms), Police
Quality of Service (QoS) Commands
no policy-map <policyname>
Global Config
assign-queue <queueid>
Policy-Class-Map Config
drop
Policy-Class-Map Config
v3.0, January 2008
parameter is the
<policyname>
13-19