Port-Channel; Clear Port-Channel; Port Lacpmode - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

12.1.4 port-channel

This command configures a new port-channel and generates a logical unit/slot/port
number for the port-channel. The
"-" character as well as alphanumeric characters. Display this number using the
port channel
Note: Before you include a port in a port-channel, set the port physical mode. For
Format
Mode
12.1.4.1 no port-channel
This command deletes a port-channel (LAG).
Format
Mode

12.1.5 clear port-channel

Use this command to clear all configured port channels.
Format
Mode

12.1.6 port lacpmode

This command enables Link Aggregation Control Protocol (LACP) on a port.
Default
Format
Mode
12.1.6.1 no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format
Mode
Port-Channel/LAG (802.3ad) Commands
<name>
command.
more information, see
port-channel <name>
Global Config
no port-channel {<logical unit/slot/port> | all}
Global Config
clear port-channel
Privileged EXEC
enabled
port lacpmode
Interface Config
no port lacpmode
Interface Config
v3.0, January 2008
field is a character string which allows the dash
Section 4.1.11 "speed" on page
show
4-5.
12-3