Configure The Dhcp Relay - NETGEAR M4100 Series User Manual

• Specific Address Conflict to specify a dynamic binding.
The following table describes the DHCP Conflicts Information fields.
Table 19. DHCP conflicts information
Field
IP Address
Detection Method
Detection Time

Configure the DHCP Relay


To configure the DHCP relay:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
M4100 Series Managed Switch
Description
Specifies the IP Address of the host as recorded on the DHCP server.
Specifies the manner in which the IP address of the hosts were found
on the DHCP server.
Specifies the time when the conflict was detected in N days
NNh:NNm:NNs format with respect to the system up time.
Configure System Information
68