Shell Script - ZyXEL Communications NXC2500 User Manual

Table 180 Maintenance > File Manager > Firmware Package (continued)
LABEL
Schedule
Time (hh:mm)
Date (yyyy-mm-
dd)
Apply
Reset
After you see the Firmware Upload in Process screen, wait two minutes before logging into the
NXC again.
Figure 206 Firmware Upload In Process
Note: The NXC automatically reboots after a successful firmware update.
The NXC automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 207 Network Temporarily Disconnected
After five minutes, log in again and check your new firmware version in the Dashboard screen.
If the firmware update was not successful, the following message appears in the screen.
Figure 208 Firmware Upload Error

30.4 Shell Script

Use shell script files to have the NXC use commands that you specify. Use a text editor to create the
shell script files. They must use a ".zysh" filename extension.
Chapter 30 File Manager
DESCRIPTION
Select this option to turn on the firmware update scheduling feature.
Note: To enable scheduling, you have to select this option and click Apply before you
upload a firmware package. Otherwise, the NXC installs the uploaded firmware
package immediately.
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to
install the firmware.
Select or specify the day in year-month-date format to install the firmware.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
NXC Series User's Guide
351