28.6.9 Add MX Record
Click the Add icon in the MX Record table to add a MX record.
Figure 173 Configuration > System > DNS > Add MX Record
The following table describes the labels in this screen.
Table 158 Configuration > System > DNS > Add MX Record
LABEL
Domain Name
IP Address/FQDN
OK
Cancel
28.6.10 Add Service Control
Click the Add icon in the Service Control table to add a service control rule.
Figure 174 Configuration > System > DNS > Add Service Control Rule
The following table describes the labels in this screen.
Table 159 Configuration > System > DNS > Add Service Control Rule
LABEL
Create new
Object
Address Object
Chapter 28 System
DESCRIPTION
Enter the domain name where the mail is destined for.
Enter the IP address or Fully-Qualified Domain Name (FQDN) of a mail server that handles
the mail for the domain specified in the field above.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving
DESCRIPTION
Use this to configure any new settings objects that you need to use in this screen.
Select ALL to allow or deny any computer to send DNS queries to the NXC.
Select a predefined address object to just allow or deny the computer with the IP address
that you specified to send DNS queries to the NXC.
NXC Series User's Guide
300