Console Port Speed; Log And Trace; Figure 12-5 Menu 24.2.2 - System Maintenance - Change Console Port Speed; Table 12-2 Fields In System Maintenance - ZyXEL Communications Prestige 202 User Manual

FIELD
Name
Routing
ZyNOS F/W Version
Country Code
Ethernet Address
IP Address
IP Mask
DHCP

12.1.2 Console Port Speed

You can set up different port speeds for the console port through Menu 24.2.2 – Console Port
Speed. Your Prestige supports 9600 (default), 19200, 38400, 57600, and 115200bps for the
console port. Use [space bar] to select the desired speed in Menu 24.2.2, as shown in the
following figure.
Press Space Bar to Toggle.
Figure 12-5 Menu 24.2.2 – System Maintenance – Change Console Port Speed

12.2 Log and Trace

There are two logging facilities in the Prestige. The first is the error logs and trace records that are
stored locally. The second is the UNIX syslog facility for message logging.
System Maintenance

Table 12-2 Fields in System Maintenance

Displays the system name of your Prestige. This information can be modified in
–
Menu 1 General Setup.
Refers to the routing protocol used.
Refers to the version of the ZyNOS Network Operating System firmware.
ZyNOS is a registered trademark of ZyXEL Communications Corp.
Refers to the one byte country code value (in decimal notation).
Refers to the Ethernet MAC (Media Access Control) of your Prestige.
This is the IP address of the Prestige in dotted decimal notation.
This shows the subnet mask of the Prestige.
This field shows the DHCP setting (None, Relay, or Server) of the Prestige.
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
Prestige 202 ISDN Router
DESCRIPTION
12-5