Add/Edit Address Group Rule - ZyXEL Communications NXC2500 User Manual

The following table describes the labels in this screen.
Table 125 Configuration > Object > Address > Address Group
LABEL
Add
Edit
Remove
Object
Reference
#
Name
Description

21.3.1 Add/Edit Address Group Rule

The Add/Edit Address Group Rule screen allows you to create a new address group or edit an
existing one. To access this screen, go to the Address Group screen and click either the Add icon
or an Edit icon.
Figure 139 Configuration > Object > Address > Address Group > Add/Edit
The following table describes the labels in this screen.
Table 126 Configuration > Object > Address > Address Group > Add/Edit
LABEL
Name
Description
Chapter 21 Addresses
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so.
Select an entry and click Object Reference to open a screen that shows which settings use
the entry.
This field is a sequential value, and it is not associated with a specific address group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
This field displays the description of each address group, if any. You can use up to 60
characters, punctuation marks, and spaces.
NXC Series User's Guide
243