Ip Address Setup - ZyXEL Communications NR2301 User Manual

Make sure your client is not blocked. You can check this on the Web Configurator (See
1
page 43).
Make sure your SIM card's mobile data is enabled. Check this on the Web Configurator (See
2
on page 38).
If you have set a data limit, make sure you have not reached it yet. You can check your data left in the
3
Web Configurator.
Reboot the NR2301.
4
The Internet connection is slow or intermittent.
There might be a lot of traffic on the network. If the NR2301 is sending or receiving a lot of information, try
1
closing some programs that use the Internet, especially peer-to-peer applications.
Check the signal strength on the Device LCD screen. If the signal strength is low, try moving the NR2301
2
closer to the ISP's base station if possible, or try pointing it directly to the ISP's base station. Look around
to see if there are any devices that might be interfering with the WiFi network (for example, microwaves,
other WiFi networks, and so on).
Reboot the NR2301.
3
If the problem continues, contact the network administrator or vendor.
4

10.5 IP Address Setup

I need to set the computer's IP address to be in the same subnet as the NR2301.
In Windows 10, open the Control Panel.
1
Click Network and Internet (this field may be missing in your version) > Network and Sharing Center.
2
Chapter 10 Troubleshooting
NR2301 User's Guide
112
Chapter 5 on
Chapter 4