Add Or Edit A Parental Control Profile - ZyXEL Communications Nebula LTE3301-PLUS User Manual

The following table describes the fields in this screen.
Table 98 Security > Parental Control
LABEL
General
Parental Control
Parental Control Profile (PCP)
Add new PCP
#
Status
PCP Name
Home Network
User MAC
Internet Access
Schedule
Network Service
Website
Blocked
Modify
Cancel
Apply

19.2.1 Add or Edit a Parental Control Profile

Click Add new PCP in the Parental Control screen to add a new rule or click the Edit icon next to an
existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL filtering
settings to block the users on your network from accessing certain web sites.
Chapter 19 Parental Control
DESCRIPTION
Select Enable to activate parental control on the Zyxel Device.
Click this if you want to configure a new Parental Control Profile (PCP).
This shows the index number of the rule.
This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active
This shows the name of the rule.
This shows the MAC address of the LAN user's computer to which this rule applies.
This shows the days and time on which parental control is enabled.
This shows whether the network service is configured. If not, None will be shown.
This shows whether the website block is configured. If not, None will be shown.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
Nebula Mobile Router User's Guide
239