Chapter 2; Hardware Installation & Initial Setup; Front Panel Leds And Back Panel Ports; Front Panel Leds - ZyXEL Communications Prestige 310 User Manual

Prestige 310 Broadband Internet Access Router
Hardware Installation & Initial Setup
This chapter shows you how to connect the hardware and to perform the initial setup.
2.1

Front Panel LEDs and Back Panel Ports

2.1.1 Front Panel LEDs

The LEDs on the front panel indicate the operational status of the Prestige.
The following table describes the LED functions:
LEDs Function Indicator Status Active
PWR Power
SYS System
10M LAN LAN
Hardware Installation and Setup

Figure 2-1 Front Panel

Table 2-1 LED functions

Green On
Off
On
Flashing
Green Off
On
Description
The power adapter is connected to the Prestige.
The system is not ready or failed.
The system is ready and running.
The system is rebooting.
The 10M LAN is not connected.
The Prestige is connected to a 10M LAN.

Chapter 2

2-1