Add/Edit Session Limit - ZyXEL Communications NXC2500 User Manual

Table 94 Configuration > Firewall > Session Control (continued)
LABEL
Add
Edit
Remove
Activate
Inactivate
Move
Status
#
User
IPv4 Address
Description
Limit
Apply
Reset

16.3.1 Add/Edit Session Limit

Click Configuration > Firewall > Session Limit and the Add or Edit icon to display the Firewall
Session Limit Edit screen. Use this screen to configure rules that define a session limit for specific
users or addresses.
Figure 107 Configuration > Firewall > Session Limit > Add/Edit
Chapter 16 Firewall
DESCRIPTION
Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you want to remove
it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To change a rule's position in the numbered list, select the rule and click Move to display
a field to type a number for where you want to put that rule and press [ENTER] to move
the rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their numbering.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This is the index number of a session limit rule. It is not associated with a specific rule.
This is the user name or user group name to which this session limit rule applies.
This is the address object to which this session limit rule applies.
This is the description for the rule.
This is how many concurrent sessions this user or address is allowed to have.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
NXC Series User's Guide
192