Auth. Policy Add/Edit - ZyXEL Communications NXC2500 User Manual

The following table describes the labels in this screen.
Table 84 Configuration > Captive Portal > Add Exceptional Services
LABEL
Available
Member
OK
Cancel

14.2.2 Auth. Policy Add/Edit

This screen allows you to add authentication policies to captive portal interception. Click the Add or
Edit button (for an existing policy) in the Authentication Policy Summary table on the Captive
Portal screen to access this screen.
Figure 91 Configuration > Captive Portal > Auth. Policy Add/Edit
The following table describes the labels in this screen.
Table 85 Configuration > Captive Portal > Auth. Policy Add/Edit
LABEL
Create New
Object
Enable Policy
Description
Chapter 14 Captive Portal
DESCRIPTION
This lists all available network services eligible for being excepted from captive portal
interception.
This lists all networks services currently assigned to the Exceptional Services table.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select an object (Address or Schedule) from the list to create a new one. You can then
use the object with the authentication policy rule. For example, if you create a new address
object called 'CoffeeBar', then you can select it immediately from the Source Address list
or the Destination Address list in this screen.
Select this to enable the new authentication policy. You can later edit the authentication
policy and deselect it if you want to disable it.
Enter an optional description of the authentication policy. You can enter up to 60
characters.
NXC Series User's Guide
171