Figure 5-7 Menu 12 - Ip Static Route Setup; Figure 5-8 Edit Ip Static Route; Table 5-3 Edit Ip Static Route Menu Fields - ZyXEL Communications Prestige 202 User Manual

To configure an IP static route, use Menu 12 – IP Static Route Setup, as displayed next.
From Menu 12, select one of the available IP static routes to open Menu 12.1 – Edit IP Static
Route, as shown next.
The following table describes the fields for Menu 12.1 – Edit IP Static Route Setup.
FIELD
Route Name
Active
Destination IP Address
Remote Node TCP/IP Configuration
Menu 12 - IP Static Route Setup
1. ________
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter selection number:
Figure 5-7 Menu 12 – IP Static Route Setup
Menu 12.1 - Edit IP Static Route
Route #: 1
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to Confirm or ESC to Cancel:

Figure 5-8 Edit IP Static Route

Table 5-3 Edit IP Static Route Menu Fields

Enter a descriptive name for this route. This is for identification purpose only.
This field allows you to activate/deactivate this static route.
This parameter specifies the IP network address of the final destination. Routing
is always based on network number. If you need to specify a route to a single
host, use a subnet mask of 255.255.255.255 in the subnet mask field to force
Prestige 202 ISDN Router
DESCRIPTION
5-7