Chapter 3 App Tutorials – Zyxel Multy
Tap DMZ IP on the Settings screen to configure your DMZ host. Enter a device IP address or tap Select
2
from Device List and choose a device connected to the Multy WiFi System. Make sure DMZ is enabled
on the Settings screen to use this feature.
3.24 Switch to NAT or Bridge Mode
In NAT mode, the Multy Device routes traffic between a local network and another network such as the
Internet. Choose NAT mode if you want the Multy Device to assign local IP addresses to devices
connected to it (DHCP) and use routing features.
In Bridge mode, the Multy Device broadcasts traffic to the local network from the Internet. Choose
Bridge mode if you have an existing router in your network and you do not want to reconfigure routing
settings.
The following (routing) features are enabled in NAT mode:
• Parental Control
• UPnP
• Reserve IP
• Port Forwarding
• DMZ
• SIP
• Guest WLAN
Multy WiFi System User's Guide
111