Show Mac Address-Table Address - Cisco ME 3800X Command Reference Manual

Chapter

show mac address-table address

To display MAC address table information for the specified MAC address, use the show mac
address-table address command in user EXEC mode.
Syntax Description mac-address
bridge-domain
number]
interface interface-id
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(52EY
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table address command:
Switch# show mac address-table address 0014.c23b.3573
-------------------------------------------
Vlan
----
1
3
Total Mac Addresses for this criterion: 2
OL-28238-01
show mac address-table address mac-address [bridge-domain number] [interface interface-id]
[vlan vlan-id] [ | {begin | exclude | include} expression]
Specifies the 48-bit MAC address; the valid format is H.H.H.
(Optional) Displays information for the specified Ethernet Flow Point (EFP)
bridge domain. The range is from 1 to 8000.
(Optional) Displays information for a specific interface. Valid interfaces
include physical ports and port channels.
(Optional) Displays entries for the specific VLAN only. The range is 1 to
4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- --------
0014.c23b.3573 DYNAMIC
0014.c23b.3573 DYNAMIC
Ports
-----
Gi0/5
Gi0/2+Efp66
Cisco ME 3800X and ME 3600X Switch Command Reference
show mac address-table address
-105