Show Platform Configuration - Cisco Catalyst 3560X-24P Command Reference Manual

show platform configuration

show platform configuration
Use the show platform configuration privileged EXEC command to display platform-dependent
configuration-manager related information.
This command is not supported on switches running the LAN base feature set.
Note
Syntax Description config-output
default
running
startup
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 3750-X and 3560-X Switch Command Reference
C-4
show platform configuration {config-output | default | running | startup} [ | {begin | exclude |
include} expression]
Display the output of the last auto-configuration application.
Display whether or not the system is running the default configuration.
Display a snapshot of the backed-up running configuration on the local
switch.
Display a snapshot of the backed-up startup configuration on the local switch.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
OL-21522-02