Show Platform Ipv6 Mld Snooping - Cisco Catalyst 3560X-24P Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform ipv6 mld snooping

Use the show platform ipv6 mld snooping privileged EXEC command to display platform-dependent
IPv6 MLD snooping information.
Syntax Description all
control
di
counters
flood
vlan vlan_id
group ip-address
hardware
retry [local | remote
[count]
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-21522-02
show platform ipv6 unicast {all | control [di] | counters | flood [vlan vlan_id | group ip-address
| hardware] | retry [local | remote [count] [| {begin | exclude | include} expression]
Display all MLD snooping platform IP multicast information.
Display MLD snooping control information.
(Optional) Display MLD snooping control entries.
Display MLD snooping counters.
Display MLD snooping flood information.
(Optional) Display MLD snooping flood information for the specified
VLAN. The range is 1 to 4094.
Display MLD snooping IP multicast group information for the group with the
specified IP address.
Display MLD snooping hardware IP multicast information
Display MLD snooping retry information:
(Optional) local—Display local retry entries.
•
• (Optional) remote—Display remote retry entries.
(Optional) count—Display the retry count.
•
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform ipv6 mld snooping
C-19