Cisco Catalyst 3560X-24P Command Reference Manual page 1160

show platform tcam
Syntax Description handle number
log-results
table {acl | all | equal-cost-route
| ipv6 {acl | qos | secondary}
local | mac-address |
multicast-expansion | qos |
secondary | station | vlan-list}
usage
[[asic number [detail [invalid]] |
[index number [detail [invalid]] |
invalid | num number [detail
[invalid]] | invalid] | [invalid] |
[num number [detail [invalid]] |
invalid]]
| begin
| exclude
| include
expression
Note Though visible in the command-line help strings, the ipv6, equal-cost-route, multicast-expansion,
secondary, and usage keywords are not supported on switches running the LAN base feature set.
Catalyst 3750-X and 3560-X Switch Command Reference
C-48
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
Display the hardware memory handle. The range is 0 to
4294967295.
Display the hardware memory log results.
Display lookup and forwarding table information. The keywords
have these meanings:
acl—Display the access-control list (ACL) table.
•
• all—Display all the hardware memory tables.
equal-cost-route—Display the equal-cost-route table.
•
• ipv6—Display IPv6 information.
– acl—Display the IPv6 ACL-table information.
– qos—Display the IPv6 QoS-table information.
secondary—Display the IPv6 secondary-table
–
information.
local—Display the local table.
•
• mac-address—Display the MAC-address table.
multicast-expansion—Display the IPv6 multicast-expansion
•
table.
qos—Display the QoS table.
•
secondary—Display the secondary table.
•
station—Display the station table.
•
vlan-list—Display the VLAN list table.
•
Display the CAM and forwarding table usage.
Display information. The keywords have these meanings:
asic number—Display information for the specified ASIC
•
device ID. The range is 0 to 15.
detail [invalid]—(Optional) Display valid or invalid details.
•
index number—(Optional) Display information for the
•
specified hardware memory table index. The range is 0 to
32768.
num number—(Optional) Display information for the
•
specified hardware memory table number. The range is 0 to
32768.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
OL-21522-02