Move To Register: Movr(560) - Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 Reference Manual

Data Movement Instructions
Description
Flags
Precautions
Example
Bs
Of
D

3-8-14 MOVE TO REGISTER: MOVR(560)

Purpose
Ladder Symbol
Variations
356
COLL(081) copies the source word (calculated by adding Of to Bs) to the des-
tination word. The same COLL(081) instruction can be used to collect data
from various source words in the data area by changing the value of Of.
Bs
Bs+n
Name Label
Error Flag ER
Equals Flag =
Negative Flag N
Be sure that the offset does not exceed the end of the data area, i.e., Bs and
Bs+Of are in the same data area.
When CIO 000000 is ON in the following example, the contents of D00110
(D00100 + 10) will be copied to D00300 if the content of D00200 is 10 (0A
hexadecimal). The contents of other words can be copied to D00300 by
changing the offset in D00200.
Bs: D00100
D00101
D00110
Sets the PLC memory address of the specified word, bit, or timer/counter
Completion Flag in the specified Index Register. (Use MOVRW(561) to set the
PLC memory address of a timer/counter PV in an Index Register.)
MOVR(560)
S
D
Variations Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation Not supported
Immediate Refreshing Specification
Of
Operation
OFF
ON if the source data is 0000.
OFF in all other cases.
ON if the leftmost bit of the source data is 1.
OFF in all other cases.
D00200
Offset +10 words
Copied by COLL(081).
S: Source (desired word or bit)
D: Destination (Index Register)
Section 3-8
0 0 0 A
4-digit hexadecimal
MOVR(560)
@MOVR(560)
Not supported