Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 Reference Manual page 310

Timer and Counter Instructions
Ladder Symbol
Variations
Applicable Program Areas
Operands
270
BCD
MTIM(543)
D1
D2
S
Binary
MTIMX(554)
D1
D2
S
Variations Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation Not supported.
Immediate Refreshing Specification
Block program areas
Not allowed OK
D1: Completion Flags
D1 contains the eight Completion Flags as well as the pause and reset bits.
15
D1
Do not use.
D2: PV Word
D2 contains the 4-digit binary or BCD PV.
Data
BCD #0000 to #9999
Binary &0 to &65535 (decimal)
#0000 to #FFFF (hex)
S: First SV Word
S through S+7 contain the eight independent SVs.
Each SV must be as follows:
Data
BCD #0000 to #9999
Binary &0 to &65535 (decimal)
#0000 to #FFFF (hex)
D1: Completion Flags
D2: PV word
S: First SV word
D1: Completion Flags
D2: PV word
S: First SV word
Step program areas Subroutines
OK
9 8 7 6 5 4 3
Reset bit
Pause bit
Range
Range
Section 3-6
MTIM(543)/
MTIMX(554)
Not supported.
Not supported.
Interrupt tasks
Not allowed
2 1 0
Completion Flags