Omron CRT1 - 10-2008 Operation Manual page 79

Preparing Flat Connectors
1,2,3...
56
■ Setting the Cable Stopper (when Extending Cable or Connecting a
Terminating Resistor)
A stopper must be set in advance when extending a line or connecting a Ter-
minating Resistor.
Close the cover, secure the hooks, and then press down on the cable stopper
until it clicks into place.
■ Attaching the Cable
■
T-branch Connections
1. Align the cable labels and cable colors and insert the cable into the cover.
2. Hold the cable and secure it with the hooks.
■
Line Extensions and Terminating Resistors
Insert the cable end all the way into a cover with the cable stopper already set.
Cable stopper
Location of cable stopper
Section 3-3