Omron CRT1 - 10-2008 Operation Manual page 113

Connecting External I/O for Slave Units
90
Model
37104-2124-000FL
37104-2165-000FL
37104-2206-000FL
OMRON Connectors
Model
XN2A-1430
■ Preparing External Device Cables
Using Tyco Electronics or Sumitomo 3M Connectors
The sensor and other external device cables for connector output with transis-
tors are normally either semi-stripped or stripped, as shown in the following
diagram.
Semi-stripped cable
When the cables are prepared this way, a cable connector cannot be
attached, so first cut the end and remove the cable sheath as shown in the fol-
lowing diagram. (Do not strip the sheaths of the core wires.)
20 mm min.
Using OMRON Connectors
Align the cable with the strip gauge on the side of the connector. Remove 7 to
8 mm of the wiring sheath, and twist the exposed wires several times.
7 to 8 mm
■ Inserting Cable Wires into the Cable Connector
Insert the cable wires of the external device into the cable connector, and con-
nect each wire so that the terminal number on the connector cover matches
the wire color as shown in the following table.
Terminal Using CRT1-VID08S, CRT1-
number ID16S(H), CRT1-MD16S(H), CRT1-
ID32S(H), CRT1-MD32S(H),
CRT1B-ID02S, CRT1B-ID02SP,
CRT1B-ID04SP
3-wire sensor
(without self-
diagnostic
output)
1 Brown (red)
2 ---
Housing color
Green
AWG22 (0.3 mm
sheath outer diameter: 1.0 to 1.2 mm
Blue
AWG22 (0.3 mm
sheath outer diameter: 1.2 to 1.6 mm
Gray
AWG22 (0.3 mm
sheath outer diameter: 1.6 to 2.0 mm
Specification
Spring clamp type AWG28 (0.08 mm
sheath outer diameter: 1.5 mm max.
Stripped cable
2-wire sensor
(without self-
diagnostic
output)
---
---
Section 3-6
Applicable wire range
2
) to AWG20 (0.5 mm
2
) to AWG20 (0.5 mm
2
) to AWG20 (0.5 mm
Applicable wire range
2
) to AWG20 (0.5 mm
Using CRT1-VID08S-1, CRT1-
ID16S(H)-1, CRT1-MD16S(H)-1,
CRT1-ID32S(H)-1, CRT1-
MD32S(H)-1, CRT1B-ID02S-1,
CRT1B-ID02SP-1, CRT1B-
ID04SLP-1
3-wire sensor 2-wire sensor
(without self- (without self-
diagnostic diagnostic
output) output)
Brown (red) Brown (white)
--- ---
2
),
2
),
2
),
2
),