Omron CRT1 - 10-2008 Operation Manual page 278

Units with Connectors
Output Section Specifications]
Item
Model
I/O capacity
Internal I/O common
Rated output current
Residual voltage
Leakage current
ON delay
OFF delay
Number of circuits per common
Isolation method
Output indicators
Power supply type
I/O power supply current con-
sumption
Output handling for communica-
tions errors
Note
Component Names and Functions (Same for CRT1-VMD32ML and CRT1-VMD32ML-1)
Indicator Section
Communications
Indicators
16 outputs
NPN
0.3 A/output, 2 A/common (See note.)
1.2 V max. (0.3 A DC, between each
output terminal and the G terminal)
0.1 mA max.
0.5 ms max.
1.5 ms max.
16 outputs/common
Photocoupler
LED (yellow)
Multi-power supply
6.5 mA max. for 24-VDC power supply voltage
Select either hold or clear from CX-Integrator.
Do not use a total external load current of more than 2 A, and do not use more
than 1 A per V terminal or G terminal.
Top
(Mounted side)
Node address switches:
×10 and ×1 from mounted side
Refer to 4-1-3 Communications Indicators.
Specification
CRT1-VMD32ML
Front
I/O indicators
Communications
I: 0 to 15 (IN)
Connector
II: 0 to 15 (OUT)
Communications indicators: MS and NS
Section 5-4
CRT1-VMD32ML-1
PNP
1.2 V max. (0.3 A DC, between each
output terminal and the V terminal)
Bottom
MIL connector
255