Analog I/O Slave Unit Functions
Setting Using the CX-Integrator
1,2,3...
1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select Parameters - Edit from the pop-up menu.)
3. Select the tab page for the output where the cumulated counter is to be set,
and select the Cumulated Count Check Box under the Function Choice
heading.
4. To set the counter unit, click the Cumulated Count Tab and select Hour
or Minute from the pull-down menu in the Cumulated Time Field.
Section 11-4
451