Omron CRT1 - 10-2008 Operation Manual page 473

Analog I/O Slave Unit Functions
450
to 214,748,364.7. Data is displayed on the CX-Integrator in units of 0.1 hours
or minutes.
Monitor values can be set in the Slave Unit. When the cumulated count value
exceeds the set monitor value, the Cumulative Counter Flag in the area for
Generic Status Flags turns ON.
Analog output value
Division width
(See note.)
Note The following table shows the divisions for the cumulative counter.
Unit
Hour
Minute
Cumulated value
(count × hour or minute)
Divisions
3.6 s (1/1,000 hour)
60 ms (1/1,000 minute)
Section 11-4
Time t