Omron CRT1 - 10-2008 Operation Manual page 283

Units with Connectors
I/O Allocation
Dimensions (Same for CRT1-VMD32ML and CRT1-VMD32ML-1)
When a DCN4-TB4 Open Type Connector Is Mounted
Communications Connector Dimensions Including the Connector and Cable
260
The following diagram shows the correspondence between MIL connector pin
numbers and allocated words and bits when the first input word for a Slave
Unit allocated in the Master Unit is m, and the first output word is n.
15 14 13 12
Word m
I 15 I 14 I 13 I 12
15 14 13 12
Word n
II 15 II 14 II 13 II 12
35
■ When a DCN4-BR4 Flat Connector I Plug Is Mounted
Input Area
11 10 9 8 7 6
I 11 I 10 I 9 I 8 I 7 I 6
Output Area
11 10 9 8 7 6
II 11 II 10
II 9 II 8 II 7 II 6
(mm)
Section 5-4
5 4 3 2 1 0
I 5 I 4 I 3 I 2 I 1 I 0
5 4 3 2 1 0
II 5 II 4 II 3 II 2 II 1 II 0
(mm)
Bit
...
16 inputs
Bit
...
16 outputs