Omron CRT1 - 10-2008 Operation Manual page 432

Functions Common to All Slave Units
Checking Using the CX-Integrator
1,2,3... 1. Turn ON the power supply to the CompoNet Slave Unit.
2. Switch to the Online Window, and then right-click the icon for the desired
CompoNet Slave Unit in the Network Configuration Window and select
Monitor from the pop-up menu.
3. Click the Error History Tab in the Monitor Window. The communications
error history showing the previous four errors will be displayed, as shown
below. To reset the entire error history, click the Clear Button.
4. Click the Close Button and exit the window.
Section 11-2
409