Omron CRT1 - 10-2008 Operation Manual page 537

CompoNet Explicit Messages
Reading Operation Time Monitor and Total ON Time/Contact Operation
Counter for All Slave Units at Once
Explicit Read
message /write
Monitor Read Reads the monitor sta-
Status for tus for total operation
Operation time monitor for all
Time Moni- Slave Units.
tor for All
Slave Units
Read at
Once
Monitor Read Reads the monitor sta-
Status for tus for total ON time or
Total ON contact operation
Time or counter for all Slave
Contact Units.
Operation
Counter for
All Slave
Units Read
at Once
Note (1) The Attribute (7E hex) is bit 6 of the Generic Status and so the size is fixed at 4 bytes and has the
following format.
+00 Size, 0002
+01
+02 IN+OUT combined, terminals 0 to 7
+03 Not used.
•Depending on the Unit size, not all bits are used.
• A value of 14FF is returned for all Units except Mixed I/O Units.
(2) The Attribute (7F hex) is bit 7 of the Generic Status and so the size is fixed at 6 bytes and has the
following format.
Offset (byte)
+00
+01
+02
+03
+04
+05
•Depending on the Unit size, not all bits are used.
514
Function
Service
code
0E hex
0E hex
Up to 32 inputs Up to 16 inputs
4
No. of data items (UNIT)
IN Area, terminals 0 Not used.
to 7
IN Area, terminals 8
to 15
IN Area, terminals 16 OUT Area, terminals
to 23 0 to 7
IN Area, terminals 24 OUT Area, terminals
to 31 8 to 15
Command
Class ID Instance Command data
ID
Attribute
ID
95 hex 01 hex 7E hex
95 hex 01 hex 7F hex
Fixed
The bit turns ON when the set value is exceeded.
Up to 32 inputs
OUT Area, terminals
0 to 7
OUT Area, terminals
8 to 15
OUT Area, terminals
16 to 23
OUT Area, terminals
24 to 31
Appendix A
Response
Service data
Data
--- +00: Response size
+01: 02 hex (fixed)
+02: Response area 1
+03: Response area 2
(See note 1.)
--- +00: Response size
+01: 08 hex (fixed)
+02: Response area 1
+03: Response area 2
+04: Response area 3
+05: Response area 4
+06: Response area 5
+07: Response area 6
+08: Response area 7
+09: Response area 8
(See note 2.)
Inputs and outputs
IN Area, terminals 0
to 7
IN Area, terminals 8
to 15
OUT Area, terminals
0 to 7
OUT Area, terminals
8 to 15