Omron CRT1 - 10-2008 Operation Manual page 464

Analog I/O Slave Unit Functions
Last Maintenance
Date
Setting Using the CX-Integrator
1,2,3...
6. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
7. Click the OK Button and exit the window.
The last maintenance date can be set in the Unit separately for the Slave Unit
and the connected devices. It enables the user to easily determine the next
maintenance date. The date can be set using the CX-Integrator.
■ Setting the Last Maintenance Date of the Unit
1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select Parameters - Edit from the pop-up menu.)
3. Click the General Tab and select a date from the Last Maintenance Date
Field. (To enter the current date, select Today from the bottom of the pull-
down menu.)
Section 11-4
441