Omron CRT1 - 10-2008 Operation Manual page 428

Functions Common to All Slave Units
Settings Using the CX-Integrator
1,2,3...
Total ON time
CompoNet network
Note The Unit Conduction Time Monitor Function adds up the time the
CompoNet Slave Unit network power supply is ON. The time when
the power is OFF is not included.
1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select Parameters - Edit from the pop-up menu.)
3. Click the General Tab. Enter the desired value in the Unit Conduction Time
Threshold Field.
4. Click the Transfer [PC to Unit] Button to download the data, and then click
the Reset Button to reset the Unit.
5. Click the OK Button and exit the window.
Stored in Slave Unit
Slave Unit
memory
Total ON time
Internal circuit
power supply
Section 11-2
ON
OFF
405