Analog I/O Slave Unit Functions
Setting Using the CX-Integrator
1,2,3...
1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select Parameters - Edit from the pop-up menu.)
3. Select the Tab Page for the output where scaling is to be performed, and
select Scaling under the Function Choice heading.
4. To select the scaling type, click the Scaling Tab, and select either Default
Scaling or User Scaling.
Section 11-4
445