Omron CRT1 - 10-2008 Operation Manual page 119

Connecting External I/O for Slave Units
Pressure-welding a Loose-wire Cable to a MIL Connector.
96
XG4M-2030-T (20-pin)
XG4M-4030-T (40-pin)
3. Bend back the cable as required, insert a Strain Relief, and lock the cable
in place.
XG4M-2030-T (20-pin)
XG4M-4030-T (40-pin)
To prepare a connecting cable by pressure-welding a loose-wire cable to a
MIL connector, assemble the connector from the components shown in the
following table.
Section 3-6