Omron CRT1 - 10-2008 Operation Manual page 359

Temperature Input Units
Effects of Mounting
Direction on Accuracy
Names and Functions of Parts
CRT1-TS04T
CRT1-TS04P
Display Section
Communications
Indicators
336
A cold junction compensator is included in the Terminal Block of the CRT1-
TS04T. The input accuracy depends on the mounting direction if only the Unit
is replaced.
Mounting direction
Mounted normally
Mounted in any direction
other than the above
Communications
indicators: MS and NS
Communications connector
Communications
indicators: MS and NS
Communications connector
Refer to 4-1-3 Communications Indicators.
Input accuracy
As specified in the Performance Specifications.
±
0.3% of indication value or
±
1 digit max.
Indicator Accuracy in Exceptional Cases
Input type and temperature
range
K, T, and N below − 100 ° C
U and L
R and S below 200 ° C
B below 400 ° C
W
PL2
Node address switches:
x10 and x1(from left)
Removal Input Terminal Block
Node address switches:
x10 and x1(from left)
Removal Input Terminal Block
Section 7-5
±
2°C (whichever is larger)
Input accuracy
±3°C ±1 digit max.
±3°C ±1 digit max.
±4°C ±1 digit max.
Not specified.
±0.3% of indication value or ±4°C
(whichever is larger) ±1 digit max.
±0.3% of indication value or ±3°C
(whichever is larger)
DIP switch (Sets
the input range.)
T S S
DIP switch (Sets
the input range.)
T S S