Omron CRT1 - 10-2008 Operation Manual page 58

Communications Cable
Flat Cable I (DCA4-4F10 Standard Flat Cable)
Flat Cable II (DCA5-4F10 Sheathed Flat Cable)
Note
Red: BS+ White: BDH Blue: BDL Black: BS−
Conduc- Insulation
tor No. color
1 Red BS+ (communications power
supply positive side)
2 White BDH (signal high)
3 Blue BDL (signal low)
4 Black BS− (communications power
supply negative side)
CompoNet-compatible products other than DCA4-4F10 can be used. Confirm
applicability with the manufacturer.
Red: BS+ White: BDH Blue: BDL Black: BS−
Conduc- Insulation
tor No. color
1 Red BS+ (communications power
supply positive side)
2 White BDH (signal high)
3 Blue BDL (signal low)
4 Black BS− (communications power
supply negative side)
CompoNet-compatible products other than DCA5-4F10 can be used. Confirm
applicability with the manufacturer.
(1) The characteristics of each conductor in Flat Cable I and Flat Cable II
have been adjusted to the application. Check the line insulator colors and
use each line only for the application given in the above table.
(2) For information on applicable CompoNet products and manufacturers, re-
fer to the ODVA home page.
Application Nominal
cross-sec-
0.75 mm
0.5 mm
0.5 mm
0.75 mm
Application Nominal
cross-sec-
0.75 mm
0.5 mm
0.5 mm
0.75 mm
Section 2-3
Allowable
current (A)
tion
2
5 max.
2
---
2
---
2
5 max.
Allowable
current (A)
tion
2
5 max.
2
---
2
---
2
5 max.
35