Omron CRT1 - 10-2008 Operation Manual page 536

CompoNet Explicit Messages
Monitoring and Setting Load Unconnected Line Detection (Slave Units
with Output Short-circuit and Disconnected Line Detection)
Explicit Read
message /write
Load Read Reads the load uncon-
Uncon- nected line detection
nected Line setting for the output
Detection (No. 1 to 32) specified by
Setting the Instance ID.
Write Writes the load uncon-
nected line detection
setting for the output
(No. 1 to 32) specified by
the Instance ID.
Load Read Reads the load uncon-
Uncon- nected line detection
nected Line setting for the output
Detection (No. 1 to 32) specified by
Status the Instance ID.
Load Line Read Reads the load line dis-
Disconnec- connection status for all
tion Status output Slave Units.
for all Slave
Units Read
at Once
Note The response data size is 1 byte for 8 outputs, 2 bytes for 16 outputs, or 4 bytes for 32 outputs.
Writing Maintenance Information
Explicit Read/
message write
Mainte- Save Stores the maintenance
nance counter in the Slave
Counter Unit's memory.
Save
Function
Service
code
0E hex
10 hex
0E hex
0E hex
Function
Service
code
16 hex
Command
Class Instance
ID ID
Attribute
ID
09 hex 01 to 20 6B hex
hex
09 hex 01 to 20 6B hex
hex
09 hex 01 to 20 6A hex
hex
1E hex 01 hex 68 hex
Command
Class ID Instance
ID
Attribute
95 hex 01 hex 75 hex
Appendix A
Response
Command data Service
Data
--- 1 byte
00 hex: Dis-
abled (Not
used.)
01 hex:
Enabled
(Used.)
1 byte ---
00 hex:
Disabled (Not
used.)
01 hex:
Enabled
(Used.)
--- 1 byte
00 hex: Nor-
mal
01 hex: Line
disconnec-
tion
--- 1 byte,
2 bytes, or
4 bytes
00 hex:
Normal
Other than
00 hex:
Load line
disconnec-
tion at appli-
cable
terminal.
(Inputs 0 to
31: Bits 0 to
31) (See
note.)
Response
Command data
Data
ID
--- ---
data
Service
data
513