Omron CRT1 - 10-2008 Operation Manual page 528

CompoNet Explicit Messages
Response code
16FF Object does not exist
15FF Too much data
13FF Not enough data
0CFF Object state conflict
20FF Invalid parameter
0EFF Attribute not settable
10FF Device state conflict
14FF Attribute not supported
19FF Store operation failure
End Code
The FINS communications end code is returned. For details, refer to the SYSMAC CS/CJ/CP-series and SYS-
MAC One NSJ-series Communications Commands Reference Manual (Cat. No. W342).
Error name
The specified Instance ID is not supported.
The data is larger than the specified size.
The data is smaller than the specified size.
The specified command cannot be executed due to an internal error.
The specified operation command data is not supported.
An Attribute ID supported only for reading has been executed for a
write service code.
The specified command cannot be executed due to an internal error.
The specified Attribute is not supported.
The data cannot be stored in memory.
Appendix A
Cause
505