Omron CRT1 - 10-2008 Operation Manual page 499

Temperature Input Unit Functions
Setting Using CX-Integrator
1,2,3...
476
Temperature
input value
Note The following table shows the time divisions and number of measurements.
Units
Hours
Minutes
1. Turn ON the power supply to the Temperature Input Unit.
2. Double-click the icon of the Temperature Input Unit to be set in the Network
Configuration Window or right-click the icon and select Parameter - Edit.
The Configuration Window will be displayed.
3. Click the tab for the input where the cumulative counter is to be set, and
select the Cumulated Count Check Box in the Function Choice Area.
4. To set the counter unit, click the Cumulated Count Tab and select Hour
or Minute in the Cumulated Timer Field.
Integral value
( ° C × hours or ° C × minutes)
Time division
(See note.)
Time division
12 seconds
200 ms
Section 11-5
Time
Number of measurements
300
300