Omron CRT1 - 10-2008 Operation Manual page 486

Temperature Input Unit Functions
Setting Using CX-Integrator
1,2,3... 1. Turn ON the power supply to the Temperature Input Unit.
2. Double-click the icon of the Temperature Input Unit to be set in the Network
Configuration Window or right-click the icon and select Parameter - Edit.
The Configuration Window will be displayed.
3. Click the tab for the input where top/valley count is to be used, and select
the Top/Valley Check Box in the Function Choice Area.
4. Select the Top/Valley Tab Page and select Top Count or Valley Count in
the Count Type Field.
5. Set the monitor value for the top/valley counter.
6. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
7. Click the OK Button and exit the window.
Section 11-5
463