Temperature Input Unit Functions
Setting Using CX-Integrator
1,2,3...
458
Flag is turned ON, then enables the peak/bottom hold values after a fixed time
interval.
1. Turn ON the power supply to the Temperature Input Unit.
2. Double-click the icon of the Temperature Input Unit to be set in the Network
Configuration Window or right-click the icon and select Parameter - Edit.
The Configuration Window will be displayed.
3. Click the tab for the input where peak/bottom hold is to be set, and select
the Peak/Bottom Check Box in the Function Choice Area.
4. To allocate the Hold Flag (output) in the default connection path, click the
General Tab Page and select Holding Value in the Default Connection
Path (Out) Field.
5. Click the Transfer [PC to Unit] Button to download the data, and then click
the Reset Button to reset the Unit.
6. Click the OK Button and exit the window.
Section 11-5