Omron CRT1 - 10-2008 Operation Manual page 411

Clamp Terminal Blocks
CRT1B-MD04SLP-1 (PNP)
Note
Dimensions (Same for CRT1B-MD04SLP and CRT1B-MD04SLP-1)
388
V
1
NC NC
2
G
3
IN
0
4
NC
1 NC
2-wire sensor
(e.g., limit switch)
NC NC
2
G
3
4
OUT OUT
0
Solenoid,
valve, etc.
(1) When using an inductive load (such as a solenoid valve), either use a
built-in diode for absorbing the counterelectromotive force or install an ex-
ternal diode.
(2) Wire colors have been changed according to revisions in the JIS stan-
dards for photoelectric and proximity sensors. The colors in parentheses
are the wire colors prior to the revisions.
61.25
Figures in parentheses are reference dimensions.
V
G
IN
1
3-wire sensor with PNP
output (photoelectric
sensor or proximity sensor)
G
1
Solenoid,
valve, etc.
(594.5)
94.5
(Unit: mm)
Section 9-4