Ddns - EverFocus EHN3160 Plus User Manual

Hide thumbs Also See for EHN3160 Plus:
Table of Contents

Advertisement

7.3.2 DDNS

DDNS (Dynamic Domain Name System) is a service used to map a domain name to the dynamic IP
address of a network device. You can set up the DDNS service for remote access to the IP camera.
DDNS assigns a domain name (URL) to the IP camera, so that the user does not need to go through
the trouble of checking if the IP address assigned by DHCP Server has changed. Once the IP is
changed, the IP camera will automatically update the information to the DDNS to ensure it is always
available for remote access.
Before enabling the following DDNS function, user should have applied for a host name from the
DDS service provider's website. We support these four DDNS server providers:
www.everfocusddns.com, www.sitelutions.com, www.dyndns.com, and
Note: We highly recommend that you use xxxx.everfocusddns.com for the simplicity of setting
up your IP cameras.
【DDNS Settings】
Enable: Check this box to enable the DDNS function.
Service ISP: You can either apply for a host name from EverFocus or other DDNS server providers.
If you choose the EverFocus DDNS server, you can obtain a free host name from EverFocus by
following the steps below:
• From EverFocus: To obtain a free host name from EverFocus, type a desired host name in the
textbox, click the Register / Update button, and then click the Apply button.
• From other DDNS server providers: To obtain a domain name from one of the three DDNS
server providers, you have to register your name with the provider first, and then select the
provider and fill in the required information. Please refer to the specific DDNS company's
website for further information.
Click Apply to apply the setting changes or Reset to reset without saving the changes.
32
EHN Plus Series
www.no-ip.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ehn3340 plusEhn3260 plus

Table of Contents