Detection; Perimeter Intrusion Detection - EverFocus EZN Series User Manual

5.8.2

Detection

You can configure intelligent detection on this page. The intelligent detection functions include Perimeter
Intrusion Detection, Line Crossing Detection, Object Detection, Pedestrian Detection, Face Detection and Cross
Counting.
For 5MP and 8MP models, all intelligent detection functions are available. For 2MP models, only Perimeter
Intrusion Detection, Line Crossing Detection and Object Detection functions are supported.

5.8.2.1 Perimeter Intrusion Detection

When objects (people, vehicle or other objects) enter in or out of a pre-defined region, the Perimeter Intrusion
Detection event will be triggered. You can configure some event actions like event recording, alarm output or
Email alert when an event is triggered.
Analysis
Switch: Switch the button to the right to enable the function.
Timeout Duration: After enabling the Alarm Out, select a timeout duration for the alarm output.
Post Recording: Select a post recording time when a Perimeter Intrusion event is triggered.
Sensitivity: Select a sensitivity for the Perimeter Intrusion Detection. The larger the value, the higher the
sensitivity.
Scene: Select Indoor or Outdoor based on the location where your IP camera is installed.
Alarm Out: Switch the button to the right to enable the alarm output, and then further configure the Timeout
Duration above.
Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
Perimeter Intrusion Line-Crossing
Pedestrian Detection Face Detection
Object Detection
Cross Counting
56