Table of Contents
Advertisement
One-to-One Connection (Directly from PC to IP camera)
You can connect directly without using a switch, router or modem. However, only the PC connected
to the camera will be able to view the IP camera. You will also have to manually assign a compatible
IP address to both the computer and the IP camera. Unless the PC has another network connection,
the IP camera will be the only network device visible to the PC. See the diagram below:
Cat 5
Right: Pinout of a crossed-over cable.
6. Upgrading Firmware
You can upgrade camera's firmware using the IP Utility software, which is included in the software
CD.
1.
Install and then start the IPU program
automatically search the IP devices connected in the LAN.
2.
Log in the camera by checking the desired model and then click the Log in
in dialog box appears.
, the following IPU window appears. The IPU will
21
EFN Series Fisheye IP Camera
icon. The Log
Advertisement
Table of Contents
