REP 12.8 Finisher Drive Motor
Parts List on
PL 17.7
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove the Rear Cover
(PL
17.5).
2.
Remove the Finisher Drive Motor
(Figure
1
Remove Screws
(4) and Finisher
Drive Motor
2
Disconnect Connector
Figure 1 Removing the Finisher Drive Motor
Replacement
Position the Belt to the Guide when installing the Drive Motor.
Repairs and Adjustments
REP 12.8
WARNING
1).
09/03
4-114
Initial issue
DC 3535/2240/1632, WC M24