Step 2.
Fasten the screw that secures the network adapter to the front I/O expansion board.
Figure 74. Network adapter installation
After you finish
Complete the parts replacement. See
OCP module replacement
Follow instructions in this section to remove and install the OCP module.
Remove the OCP module
Follow instructions in this section to remove the OCP module.
About this task
Attention:
• Read
"Installation Guidelines" on page 45
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1.
Loosen the thumbscrew.
ThinkSystem SR675 V3 User Guide
108
"Complete the parts replacement" on page
and
"Safety inspection checklist" on page 46
54.
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
194.
to ensure that you