Lenovo ThinkSystem SR675 V3 User Manual page 106

Figure 65. M.2 signal and power connector locations
M.2 power connector
1
After you finish
1. Reinstall the M.2 drives. See
2. Complete the parts replacement. See
Install an M.2 drive
Follow instructions in this section to install an M.2 drive.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Locate the connector you want to install the M.2 drive on the M.2 backplane.
Step 2. If needed, adjust the position of the M.2 drive retainer so that it is compatible with the size of the
M.2 drive you are installing.
ThinkSystem SR675 V3 User Guide
98
"Install an M.2 drive" on page
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 46
.
M.2 signal connector
2
98.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
194.
to ensure that you