Lenovo ThinkSystem SR675 V3 User Manual page 200

Figure 157. GPU adapter link bridge removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install a GPU adapter link bridge
Follow instructions in this section to install a GPU adapter link bridge.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
• Depending on the specific type, the GPU adapter might look slightly different from the illustrations in this
section.
• Follow the additional instructions in any documentation that comes with your GPU adapter.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Notes: Install the GPU adapter link bridge to connect the GPU pairs listed below:
• GPU 1 and GPU 2
• GPU 3 and GPU 4
• GPU 5 and GPU 6
• GPU 7 and GPU 8
Step 1. Remove the link connector cover from the GPU adapter.
ThinkSystem SR675 V3 User Guide
192
and "Safety inspection checklist" on page 46
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
to ensure that you