Figure 155. GPU distribution board installation — 8-DW GPU Model
Step 3.
Connect the power and signal cables to the GPU distribution board. Depending on the server
model, see below for more details:
• 4-DW GPU Model:
• 8-DW GPU Model:
After you finish
1. Reinstall the GPU adapters. See
2. Complete the parts replacement. See
GPU adapter link bridge replacement
Follow instructions in this section to remove and install a GPU adapter link bridge.
Remove a GPU adapter link bridge
Follow instructions in this section to remove a GPU adapter link bridge.
About this task
Attention:
• Read
"Installation Guidelines" on page 45
work safely.
ThinkSystem SR675 V3 User Guide
190
"GPU distribution board cable routing" on page 205
"GPU distribution board cable routing" on page 212
"Install a GPU adapter" on page
"Complete the parts replacement" on page
and
"Safety inspection checklist" on page 46
183.
194.
to ensure that you