• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1.
Fasten the five screws to secure the PCIe riser card to the PCIe riser cage.
Figure 88. PCIe riser card installation
After you finish
1. Reinstall the PCIe adapter or the serial port module. See
the serial port module" on page
2. Reinstall the PCIe riser. See
3. Reconnect the required cables.
4. Complete the parts replacement. See
Power distribution board replacement
Follow instructions in this section to remove and install the power distribution board.
Remove the power distribution board
Follow instructions in this section to remove the power distribution board.
About this task
.
135.
"Install a PCIe riser" on page
"Complete the parts replacement" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
"Install a PCIe adapter" on page 114
115.
.
Chapter 5
Hardware replacement procedures
or
"Install
194.
121