Lenovo ThinkSystem SR675 V3 User Manual page 117

Step 2. Grasp the handle and slide the OCP module out.
Figure 75. OCP module removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the OCP module
Follow instructions in this section to install the OCP module.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. If the OCP is covered with a OCP filler, remove the filler from the chassis first.
Step 2. Install the OCP module.
a. Slide the OCP module into the slot until it is fully seated.
b. Tighten the thumbscrew to secure the OCP module.
and "Safety inspection checklist" on page 46
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 5 Hardware replacement procedures
to ensure that you
109